
Photo by Patrick on Pexels
Windows 11 includes native drive health monitoring inside its standard Settings menu, eliminating the need to install third-party utilities or enter command-line prompts just to see if a solid-state drive is dying. Solid-state drives carry a hard limit on their operational lifespan, tracked in terabytes written (TBW). Along with worn storage cells, hidden data corruption and the reserve cell count dictate how much longer a drive will function before failure. Microsoft built a status reader directly into the operating system storage menus to surface these numbers, though the feature functions strictly with NVMe SSDs. Checking a drive requires right-clicking the Windows icon on the taskbar, choosing Settings, clicking System in the left sidebar, and navigating through Storage to Advanced Storage Settings, where the Disks and Volumes menu lives. Drives working correctly show a basic Healthy status, while units suffering from hardware faults or write exhaustion get marked with a flag.
The Disks and Volumes panel holds more than just a passing grade for the hardware. Selecting the Properties button next to a specific drive brings up a detailed read-out that includes the drive’s current operating temperature alongside an estimated remaining lifespan presented as a percentage. The interface also displays the available spare percentage, revealing how much reserved space the hardware has left to swap in when primary flash cells inevitably burn out. It is a clean dashboard for anyone worried about write limits, but it completely ignores traditional SATA SSDs and mechanical hard disk drives. Users running those older interfaces cannot pull lifespan percentages or spare cell reserves from this menu, leaving them to rely on different system tools or dedicated diagnostic software to evaluate hardware wear.
For SATA SSDs and spinning hard disks, Windows 11 still bundles an error-checking tool inside File Explorer. You reach it by right-clicking a drive or partition, selecting Properties, opening the Tools tab, and hitting the Check button under the Error checking section. This utility scans the file structure and flags corrupted data files, offering an automated path to patch file-level defects. It also flags physical damage and bad hardware sectors, although software fixes cannot repair real physical degradation. Under the hood, this graphic tool is simply a visual shell for the chkdsk command, running the same routine without giving users the deeper data readouts or granular operational switches found in a terminal. Getting genuine control over the process still requires opening the Windows Command Prompt, which you launch by hitting Windows and R, typing cmd into the Run box, and manually running chkdsk C: for basic testing or chkdsk C: /r /f to locate and repair storage faults.
The primary built-in tools break down along interface lines. The Windows 11 Settings route requires an NVMe SSD to show drive health percentages, operational temperatures, and available spare flash cells. The File Explorer error tool handles both SATA SSDs and HDDs for basic data corruption scans, while the Command Prompt interface accepts the chkdsk C: diagnostic and chkdsk C: /r /f repair commands across standard drive volumes.
Watch for drive health flags to appear in the Disks and Volumes menu before available spare cell percentages drop toward zero.
Source: Bgr
This article was researched and drafted with AI assistance.


